Directions for use: Use HG Polish Wax and Dirt Remover (HG Remover) to ensure that old floors are perfectly clean before applying a new polish layer such as HG Golvpolish. For deep oil or grease stains particularly on porous tiles and natural stone we recommend the use of HG Spot Stain Remover or HG Oil and Grease Absorber.
For difficult areas and to remove old polish dilute HG Polish Wax and Dirt Remover (HG Remover) with a minimum of 1:4 parts of warm water. In less severe cases dilute HG Polish Wax and Dirt Remover (HG Remover) up to 1:10 with warm water. When a scrubbing machine is used dilute 1:50 up 1:100 depending on degree of dirt.
Apply solution liberally to the floor treating up to 10-15 m² at a time. Leave the solution to work for at least 5-10 minutes. Do not allow the floor to dry out. Scrub the floor and when clean, mop up. Rinse the mop repeatedly. Rinse 2-3 times thoroughly with clean luke warm water afterwards.
Coverage: 20-40 m² per litre. 100-250 m² where a scrubbing machine is used.
Attention: For marble and other calcareous natural stone please see our Marble Floor Care Range.
Caution: HG Polish Wax and Dirt Remover (HG Remover) is rritating to eyes. Safety Goggles are recommended during use.
A powerful floor tile cleaner for natural stone
Removes grease and ingrained dirt effectively
Efficiently removes all protective films from floor tiles and flagstones
Suitable to use with a scrubbing machine
A polish wax and dirt remover in one